Newport Partners LLC
Home | Technologies | Energy Efficiency | Magnetic Refrigerators by GE

Magnetic Refrigerators by GE

Magnetic Refrigerators

GE has developed high-tech fridge magnets that could reinvent refrigeration in a few years and save the world billions of dollars in energy costs. One of the world’s biggest draws of electricity is refrigeration and air conditioning. General Electric, GE, believes it has discovered a new method of magnet-based refrigeration that is 20-30% more efficient than existing refrigeration technology, which almost universally uses a liquid refrigerant and compressor. GE launched the first commercial electric refrigerator in 1927 — and fridges have fundamentally remained unchanged for almost 100 years. GE hopes that its magnet-based technology called magnetocaloric technology, can become the refrigeration method of choice for the next 100 years.

Refrigeration technology, whether you’re talking about an air conditioner or the refrigerator in your kitchen, is all about heat exchange. Thermodynamics doesn’t allow us to to simply destroy energy, so we move it from one place to another through vapor-compression. When a refrigerant is compressed, it gets warmer (absorbs heat from inside the refrigerator). That heat is then expelled outside of the system when the vapor is allowed to expand (heats the air in your kitchen). Magnetocaloric technology is operating a very similar heat pump, but it’s driven by magnetism rather than compression.

The effects of magnetocaloric have been known about for decades, but it has simply never been practical before. Basically, some metals heat up when they are exposed a magnetic field. Take the magnet away, and they cool. General Electric realized this effect could be exploited as a heat exchanger in place of vapor compression. However, it used to only be possible with superconducting magnets cooled to very low temperatures. More advanced alloys and stronger magnets mean it can finally compete with traditional refrigeration.

To be workable in home refrigeration, the magnetic fridge needs about 100W of cooling. GE is currently at 60W with the prototype, but feels it can hit the mark in a few years. When it’s ready for the market, GE expects the price to be on-par with regular refrigeration technology, but it currently costs four times more to make a magnetocaloric refrigerator than a regular one.

Even if the cost is a little higher than expected, GE says this tech will be 20% more efficient than today’s refrigerators. Cooling is one of the largest energy draws in the world, so this has the potential to save billions of dollars and reduce greenhouse gas emissions dramatically. It will also be more reliable because no special cooling fluids are needed — it’s just water.

There are still some tough engineering problems to be worked out. Placing such strong magnets in consumer appliances hasn’t been done before, so manufacturing is likely to remain difficult. Shrinking the footprint of the magnets while increasing efficiency is also a necessity. The device can currently be as small as a shoe box, but the team still needs to improve cooling efficiency to make it practical. If the company can work out the kinks, you could be getting your first magnetocaloric refrigerator in 2020.

Article reprinted from Geek.com.

Other Sources:

ExtremeTech - https://www.extremetech.com/extreme/176393-ge-develops-high-tech-fridge-magnets-that-could-save-the-world-billions-of-dollars-in-energy-costs

 


  HVAC
 
  Plumbing
 
Energy Efficiency
 
  Renewable Energy
 
  Electrical/Power/
Lighting
 
  Roofing
 
  Walls/Paint/Flooring
 
  Structural/Insulation/
Siding
 
  Windows
 
  Mold/Moisture
 
  Software
 
  Disaster-Resistance
 
  Miscellaneous
 

 

Contact us if you have a new technology or innovation for marketing services.


Facebook Twitter LinkedIn YouTube
Site created by Purple Clover Design

Newport Partners, LLC
Ph: (301) 889-0017 • Fax: (301) 889-0019
GSA Schedule