Newport Partners LLC
Home | Technologies | Windows | Switchable Glazings
Photos courtesy
Velux-America

Click on images above for larger view.

Switchable Glazings

This prototype product provides multiple results in a single product. Switchable glazings have both optical and solar properties that vary according to voltage, heat, and light. These glazings have two states, colored and bleached. In the colored state light and solar heat are reflected off the window. In the bleached state they are transmitted through the window.

Switchable glazings fall into four basic categories:

Electrochromic. These windows can change from clear to near fully dark--or pretty much anywhere in between--at the flip of a switch. A multi-layer assembly of electronic conductors, counter-electrodes and ionic conductors is sandwiched between the two layers of traditional glazing in an IG (insulated glass) unit. Low-voltage current moves ions between the layers, causing the window to change color. Reversing the voltage restores it to its original state. These windows operate on only one to three volts and use energy only to change—not to maintain—any particular state. Read more on electrochoromic windows.

Photochromic. Like eyeglasses that tint themselves on sunny days, these windows respond to changes in light. This type of technology has some drawbacks in terms of energy efficiency; they do well at controlling glare but are less effective with solar heat gain. When the sun is lower in the sky during winter, its rays will cause the window to darken more than in the summer. This is the exact opposite effect that you would want to control heat gain. Also, while the technology works well on small pieces of glass, it has yet to be successful on a large scale for window-sized pieces.

Thermochromic. These windows automatically change from clear to diffused to white and reflective in response to heat. Gel-based coatings are the most promising method of producing thermochromic products, as the response temperatures can be adjusted depending upon need and glazing location on a building. A few products are commercially available, as the gel can be applied to almost any traditional window assembly.

Liquid Crystal. These were the first commercially available smart windows and have been used mostly for privacy control, not energy savings. Laminated between two layers of heat-treated glass are two other layers of thin film that encase a layer of tiny liquid crystals. Both faces of the film are covered with a transparent conductive metal coating. In the off position, the glass is a translucent milky white. When an electric current is applied to both layers of film, the crystals align and the glass becomes transparent. The windows let in nearly the same amount of light and heat in either position.

This product is still in its prototype stage but if commercialized it could be very useful in the office as well as residential buildings. The glazing could be used during heating and cooling seasons and maximizes energy efficiency in the building.

Contact

International Energy Agency Tasks 10 and 18 reports
Morse Associates Inc.
1808 Corcoran St. NW
Washington DC 20009
Phone: (202) 483-2392
Fax: (202) 265-2248
Web: www.iea-shc.org


  HVAC
 
  Plumbing
 
  Energy Efficiency
 
  Renewable Energy
 
  Electrical/Power/
Lighting
 
  Roofing
 
  Walls/Paint/Flooring
 
  Structural/Insulation/
Siding
 
Windows
 
  Mold/Moisture
 
  Software
 
  Disaster-Resistance
 
  Miscellaneous
 

 

Contact us if you have a new technology or innovation for marketing services.


Facebook Twitter LinkedIn YouTube
Site created by Purple Clover Design

Newport Partners, LLC
Ph: (301) 889-0017 • Fax: (301) 889-0019
GSA Schedule